UniFi Switch PRO 24

A 24-port, Layer 3 switch supporting 10G SFP+ connections with fanless cooling.

(24) GbE ports

(2) 10G SFP+ ports

DC power backup-ready

Layer 3 switching

MechanicalDimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7″)WeightWithout mounting brackets: 3.5 kg (7.7 lb)
With mounting brackets: 3.6 kg (7.9 lb)Enclosure materialSGCC steelHardwareManagement interfaceEthernet In-BandNetworking interface(24) GbE RJ45 ports
(2) 1/10G SFP+ portsTotal non-blocking throughput44 GbpsSwitching capacity88 GbpsForwarding rate65.472 MppsPower method(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input 11.5V DC, 2.61APower supplyAC/DC, internal, 36WSupported voltage range100—240V ACMax. power consumption30WESD/EMP protectionAir: ± 16kV, contact: ± 12kVLCM display(1) 1.3″ touchscreenButtonFactory resetShock and vibrationETSI300-019-1.4 StandardAmbient operating temperature-5 to 45° C (23 to 113° F)Ambient operating humidity10 to 90% noncondensingCertificationsCE, FCC, ICSwitching FeaturesLayer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLsLayer 3 featuresDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLsLEDsSystemStatusEthernetSpeed/link/activitySFP+Speed/link/activityRPSStatusApplication RequirementsUniFi NetworkVersion 5.12.11 and later